This is the enduro fork we wanted, so we made it. With bikes becoming more capable and e-bikes gaining in popularity, your suspension needs to work harder than ever. As engineers, we believe the best solution to building a stiffer, long-travel fork is by using a dual-crown design.

Most fork flex occurs at the crown steerer unit (CSU), regardless of stanchion size. A dual-crown design avoids this - and the associated creaking - by centring the stiffness around the headtube.

Absolute stiffness is not everything, though. Using our proven Selva lowers, the Belva can flex where it is most needed. With the dual crown and a direct mount stem, you can have laser sharp steering and confidence-inspiring stiffness, combined with trail-hugging traction and comfort.

The Belva is not just a rebadged DH fork, it is an enduro-ready fork that is comparable in weight to a 38mm single-crown fork (2,370g).

Designed with custom forged crowns, lightweight 35mm stanchions, a 43mm offset, a lockout lever, tapered steerer and 15mm axle, the Belva goes uphill as well as it goes down. The dual-crown design means that you can fine-tune your bar height, so you can add more travel to your bike, without spoiling the geometry.

Also included are our unique Compression Tuning System (CTS) and Neopos technology. CTS allows you to make the same changes you would get at a professional suspension tuning center in minutes, with everyday tools. Neopos not only lets you custom tune the end stroke, but helps calm the fork in the mid-stroke, and is as simple to install as a volume spacer.

It’s not all about facts and figures. A dual-crown fork not only stands out on the trails, it brings a sense of occasion to every ride. And the name? In Italian, the Belva is a mythical beast from Dante’s Divine Comedy. A fitting name for a fork built to devour trails.

Find all the Specs and shop the Belva here